Key features:

Input power: 900 W

Max. flow rate: 16000l/h

Max. pressure: 0.85 bar

Max. pumping height: 8.5m 

Max. particle size: 25mm

Cable length: 10m

Switch-off height: 5cm

Weight: 5.1 kg







https://vonroc.nl/amfile/file/download/file/208/product/2439/

Related product:

  • SP801AA

 

Most common issue, and solutions:

  • Problem: Pump does not start 

Cause: No mains supply Floater restricted 

Remedy: Check mains supply Bring floater to higher position 

  • Problem: Pump is active but no water is being delivered 

Cause: Turbine clogged 

remedy: Disconnect pump from the power supply and clean or unblock the turbine (see 'BLOCKAGES')

  • Problem: Pump will not switch off 

Cause: Floater restricted 

Remedy: Bring floater to a lower position 

  • Problem: Pump will not start or stops during use. Pump switched off after short operating periods

Cause:  Thermal overload safety switch has activated 

Remedy: Disconnect from the power supply, leave for 2 minutes and clear the turbine (if required - see 'Blockages')


Cause: Power has tripped 

Remedy: Check fuses and electrical connections 


Cause: Turbine clogged 

Remedy: Disconnect pump from the power supply and clean or unblock the turbine (see 'BLOCKAGES') 


Cause: Water too hot 

Remedy: Ensure that the water temperature has not exceeded the maximum of 35 C 

 

FAQ:

  • ....
  • ....
  • ....
  • ....

 

Other questions/comments:

  • ....
  • ....
  • ....
  • ....

 

 

Spareparts (Number of part to be replaced plus selling price (excluding shipping costs)

  • Hose connector and water outlet.